APC Back-UPS BE550G-AZ UPS, 550VA

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Data-line Protection
Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from "back door" surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment.
Cold-start capable
Provides temporary battery power when the utility power is out.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms
Provides notification of changing utility power and UPS conditions.
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. UL, FCC, CE, C-Tick approvals.
Adjustable voltage sensitivity
Provides the ability to adapt the Power Conditioner for optimal performance in specific power environments or generator applications.
Battery replacement without tools
Allows quick, easy battery replacement.APC BE550G-AZ. Output power capacity: 0,55 kVA, Output power: 330 W, Input frequency: 50/60 Hz. Battery recharge time: 16 h. Product colour: Black, Cable length: 1,83 m. Certification: A-tick, C-tick, CE, Telepermit. Weight: 6 kgOutput

Output Power Capacity: 330 Watts / 550 VA

Nominal Output Voltage: 230V

Output Frequency (sync to mains): 47 - 63 Hz

Other Output Voltages: 220

Waveform Type: Stepped approximation to a sinewave

Output Connections

•(4) Australian (Battery Backup)

•(4) Australian (Surge Protection)

Output Voltage Tolerance: +/- 5% static and 100% load step



Input

Nominal Input Voltage: 230V

Input Frequency: 50/60 Hz +/- 5 Hz (auto sensing)

Input Connections: Australian/Chinese

Cord Length: 1.83 meters

Maximum Input Current: 10A



Batteries & Runtime

Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

Typical recharge time: 16 hour(s)

Replacement Battery: APCRBC110