|
|
|
 |
| Panasonic PT-VX400NT LCD Projector, XGA, 4000 Lumens, Wireless |
|
Out of stock
|
|
|
| $1,784.29 incl GST (including FREE delivery) |
|
What do I get for my money?
|
|
|
|
Pay by direct credit and save $26.76
|
Quick glance
| Category |
Projector
|
| Wireless |
Yes
|
| Type |
LCD
|
| Bulb Life |
3000
|
| Projector Resolution |
XGA
|
| Lumens |
4000
|
|
|
|
Overview
Power supply: 100-240 V AC, 50/60 Hz
Power consumption: 322 W (0.48 W when standby mode set to Eco(*1), 14.5 W when standby mode set to Network.)
LCD panel
· Panel size: 16 mm (0.63 inches) diagonal (4:3 aspect ratio)
· Display method: Transparent LCD panel (x 3, R/G/B)
· Pixels: 786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
Lens: 1.6x manual zoom (throw ratio: 1.2-1.9:1), manual focus, F 1.65-2.33, f 15.47-24.53 mm
Lamp: 245 W × 1, lamp replacement cycle (lamp power: Normal/Eco1, Eco2): 3,000 hours/5,000 hours(*2)
Screen size (diagonal): 0.76-7.62 m (30-300 inch)
Brightness: 4,000 lm (lamp power: Auto/Normal)
Center-to-corner uniformity(*3): 85 %
Contrast: 2,000:1 (full on/full off, lamp power: Auto)
Resolution: 1,024 × 768 pixels(*5)
Scanning frequency:
· HDMI: fH: 25-80 kHz, fV: 50-85 Hz, dot clock: 162 MHz or lower
· RGB (analog): fH: 15-100 kHz, fV: 50-100 Hz, dot clock: 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
· YPBPR (YCBCR): fH: 15.75 kHz, fV: 60 Hz [480i(525i)]; fH: 31.50 kHz, fV: 60 Hz [480p(525p)]; fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]; fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]; fH: 15.63 kHz, fV: 50 Hz [576i(625i)]; fH: 31.25 kHz, fV: 50 Hz [576p(625p)]; fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]; fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
· Video/S-Video: fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift: 9:1
Keystone correction range: Vertical: ±40°, Horizontal: ±30° (Vertical: ±30°, Horizontal: ±20° when Auto Keystone)
Installation: Ceiling/floor, front/rear
Terminals
· HDMI IN: HDMI 19-pin x 1 (compatible with HDCP), 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)(*6), compatible with non-interlaced signals only, dot clock: 25 -146.25 MHz
· COMPUTER IN 1: D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
· COMPUTER IN 2/ MONITOR OUT: D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu) (When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
· VIDEO IN: RCA pin × 1 (Composite VIDEO)
· S-VIDEO IN: Mini DIN 4-pin × 1 (S-VIDEO)
· AUDIO IN: RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input
· COMPUTER AUDIO IN 1: M3 x 1 (L-R x 1)
· COMPUTER AUDIO IN 2 (MIC IN): M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
· AUDIO OUT: M3 x 1 (L-R x 1) for output (variable)
· SERIAL IN: D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
· LAN: RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (class 1))
· USB A: USB type-A (for the USB Memory Viewer) x 1
· USB B: USB type-B (for the USB Display/ Wireless Mouse) x 1
Built-in speaker: 3.7 cm round shape × 1, output power: 10.0 W (monaural)
Noise level: 35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Cabinet materials: Molded plastic
Dimensions (W × H × D): 350 x 97 x 277 mm (13.8" x 3.8" x 10.9") (with legs at shortest position, not including protruding parts)
Weight Approx.: 3.6 kg (7.9 lbs) Approx.
Operating environment: Operating temperature: 5°C-35°C (41°F-95°F), operating humidity: 20%-80% (no condensation)
Wireless Standard: IEEE802.11b/g/n
Infrastructure mode: WPA-PSK(TKIP/AES), WPA2-PSK(TKIP/AES), 128 bit/64 bit WEP, WPA-EAP/WPA2-EAP (PEAP[MS-CHAPv2/GTC], EAP-FAST[MS-CHAPv2/GTC], EAP-TTLS[MD5/MS-CHAPv2])
Ad-hoc mode(*7): 128 bit/64 bit WEP
Notes:
(*1): When the Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.
(*2): The values given for the recommended lamp replacement cycles are maximum.
(*3): Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
(*4): Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
(*5): Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
(*6): Compliant with VESA CVT-RB.
(*7): Not supported by IEEE802.11n.
(*8): Power cords available (x 2) for the PT-VW330EA/VX400NTEA/VX400EA.
Caution:
Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
NOTES ON USE
1. The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping sound, or fail to illuminate, due to impact or extended use.
2. The high-wattage lamp becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings.
• If stacking projector units, care must be taken to provide the recommended space between units. These space requirements also apply to installation
where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating temperature listed in the
specifications table during use. Also, make sure the projector’s intake and exhaust openings are not blocked. Ensure there is sufficient ventilation to
prevent hot air from the exhaust openings being recirculated into the intake opening.
3. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
4. Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.
While every attempt is made to ensure the information provided on this page is accurate, specifications change from time to time and we are not liable for any
omissions or errors.
Please read our terms and conditions
|
|
|
 | Finance options |
|
$81.93 per fortnight for 12 months
|
|
$45.77 per fortnight for 24 months
|
|
$177.52 per month for 12 months
|
|
$99.17 per month for 24 months
|
|
| Most popular products |
|
ViewSonic PJD6553w DLP Projector, WXGA, 3500 Lumens
$1,273.95 |
|
|
ViewSonic PJD5126 DLP Projector, SVGA, 2700 Lumens, 3D ready
$519.06 |
|
|
3M MP410 Mobile Projector DLP Projector, WXGA, 300 Lumens
$931.32 |
|
|
Panasonic PT-LB3EA LCD Projector, XGA, 3200 Lumens
$990.67 |
|
|
Epson EB-S110 3LCD Projector, SVGA, 2600 Lumens
$585.84 |
|
|