|
|
|
 |
| NetComm NP121 Home AV Connection Kit, Wireless AV Adapter, 300Mbps, 802.11b/g/n, Ethernet |
|
Out of stock
|
|
|
| $168.87 incl GST (including FREE delivery) |
|
What do I get for my money?
|
|
|
|
Pay by direct credit and save $2.53
|
Quick glance
| Standard |
802.11b/g/n
|
| Type |
Wireless AV Adapter
|
| Bus |
Ethernet
|
| Speed |
300Mbps
|
|
|
|
Overview
* One wireless access point and one wireless client bridge
* Pre-paired for the simplest possible setup of a wireless network connection
* Wireless N for speeds of up to 300Mbps(1)
* 4 Ethernet ports for wired connections at each end
* Functionally the same as running an Ethernet cable across the floor
* Designed to provide easy Internet access to any Internet enabled device/s
* Unique wireless SSID and security password to ensure your network remains secure.
The NetComm NP121 Wireless Network Link consists of two pre-paired wireless devices that will enable you to set-up wireless network connections with plug and play simplicity. If you have a need to get the Internet from your modem to any Internet enabled device in your house, the NP121 will provide you with a secure and reliable method for transportation, with high-speed wireless N. Whether it be your blu-ray player, gaming console, personal video recorder, digital set top box or other piece of equipment no longer will you need to run a cable across your house or install a new connection point to provide Internet access.
Featuring Wireless N, your data will be transmitted and received at the highest possible speed, making this kit ideal for any sort of hi-definition media and files of large size. With four Ethernet ports at each end, you are able to connect multiple devices, maximizing the potential of your Internet connection.
With advanced security features, including unique wireless network names and unique wireless passwords, your network will remain secure from unauthorised outside sources ensuring the best possible performance is always achievable.
Footnote:
(1) Maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 802.11n specifications. Actual wireless speed and coverage are dependent on network and environmental conditions included but not limited to volume of network traffic, building materials and construction/layout
TECHNICAL SPECIFICATIONS
HARDWARE
• MCU – RT3052, 384MHz embedded RF/MAC/BBP
• Memory– 32MB SDRAM
• Flash: 4MB
Physical Interface:
• Four x 10/100 Fast Ethernet RJ-45 LAN, Power Jack
• WPS (Wi-Fi Protected Setup) /Reset button
• Power Supply: 12V/1A
SOFTWARE FEATURES
• Topology: Infrastructure
• Operation Mode: AP/Client Bridge/ AP Repeater
LAN
• DHCP Server
• UPNP
Wireless
• 64/128 bit WEP Encryption
• WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
• Wi-Fi Protection Setup (WPS)
• ACL control
Management
• Configuration: Web-based configuration (HTTP)
• Firmware Upgrade: Upgrade firmware via web-browser
• Administrator Setting: Administrator password change Idle time out
• Reset Setting:Reboot Reset to Factory Default
• Bandwidth monitoring
ENVIRONMENT & PHYSICAL
• Temperature Range: 0 to 45° C - Operating, -10 to 70 ° C - Storage
• Humidity (non-condensing): 15%-95% typical
• Dimensions: 125mm (L) x 98mm (W) x 25mm (H)
While every attempt is made to ensure the information provided on this page is accurate, specifications change from time to time and we are not liable for any
omissions or errors.
Please read our terms and conditions
|
|
|